Headlight Assembly (For Sedan) -- Removal |
- HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
- Set the headlight leveling switch to 0 (zero) before conducting the procedure.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SPOILER COVER (w/ Front Spoiler) |
Remove the 2 screws, the 10 bolts and the front spoiler cover.
 |
| 3. REMOVE FRONT BUMPER COVER (w/ Large Front Spoiler) |
Apply protective tape, as shown in the illustration.
 |
Remove the 9 bolts and the 7 screws.
 |
Remove the 2 screw grommets.
Remove the 6 clips.
Disengage the 6 claws and remove the front bumper cover.
 |
Disconnect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, disconnect the connector.
Remove the 2 clips, the screw grommet and the 6 spring nuts.
 |
| 4. REMOVE FRONT BUMPER COVER (w/ Small Front Spoiler) |
Apply protective tape, as shown in the illustration.
|
Remove the 5 screws and the 3 bolts.
 |
Remove the 2 screw grommets.
Remove the 6 clips.
Disengage the 6 claws and remove the front bumper cover.
|
Disconnect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, disconnect the connectors.
Remove the 2 clips, the screw grommet and the 10 spring nuts.
 |
| 5. REMOVE FRONT BUMPER COVER (w/o Front Spoiler) |
Apply protective tape, as shown in the illustration.
|
Remove the 7 screws and the 3 bolts.
 |
Remove the 2 screw grommets.
Remove the 6 clips.
Disengage the 6 claws and remove the front bumper cover.
|
Disconnect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, disconnect the connectors.
Remove the 2 clips and the screw grommet.
 |
| 6. REMOVE HEADLIGHT ASSEMBLY |
Remove the 2 screws and the bolt.
 |
Disconnect the 2 connectors, then remove the headlight.