Washer Nozzle (For Hatchback Front Side) Installation

Engage the 2 claws and install the washer nozzle.

Scrape any metal powder off the serrated part of the wiper arm with a round file or the equivalent (when reinstalling).

Clean the wiper arm serrations.

Clean the wiper pivot serrations with a wire brush.

Install the front wiper sub arm.

NOTICE:

1. When reusing the front wiper arm and blade assembly, apply MP grease to the pivot of the front wiper sub arm.
   
2. Confirm that the front wiper sub arm is engaged to the pivot.
   

Install the front wiper arm and blade with the nut to the position as shown in the illustration.

Torque:

26 N*m{265 kgf*cm, 19 ft.*lbf}

HINT:

1. There are 2 marks, so make sure to inspect using the correct mark.
   
2. After tightening, confirm that the wiper blade is within the area shown in the illustration.
   

Align the rib of the washer hose with the rib of the washer nozzle and connect them.

NOTICE:

1. Make sure that the washer hose is not twisted when installing it in order to prevent interference with the hood and cowl top ventilator louver.
   
2. It is possible to connect the hose even if it is twisted 360°, so check to make sure the hose is not twisted.
   

HINT:

1. If the washer hose has been disconnected at the joint side, align the rib of the washer hose with the rib of the washer hose joint and connect them.
   

   Text in Illustration

   *1

   Rib



2. Check that the washer hose rib looks like the illustration.
   

   Text in Illustration

   *1	Washer Nozzle
   *2	Washer Hose Joint
   *3	Washer Hose
   *4	Rib

Operate the front wipers while spraying washer fluid onto the windshield. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.

Engage the 3 claws to install the front wiper arm head cap.