Washer Motor (For Sedan) -- Installation |
| 1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Install the windshield washer motor and pump onto the packing of the washer jar.
 |
| 2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY |
Install the windshield washer jar.
 |
w/ Washer Level Warning Switch
Install the 2 bolts.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
Connect the 2 connectors.
Connect the 2 harness clamps.
 |
w/o Washer level warning switch
Install the 2 bolts.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
Connect the connector.
Connect the 2 harness clamps.
| 3. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID |
Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.
| 4. INSTALL HEADLIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure as for the LH side (YARIS_NCP93 RM000000RJR01EX_01_0001.html).
| 5. INSTALL FRONT BUMPER COVER (w/ Large Front Spoiler) |
Install the 2 clips, screw grommet and the 6 spring nuts.
 |
Engage the 6 claws and install the front bumper cover.
 |
Connect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, connect the connector.
Install the 6 clips.
 |
Install the 2 screw grommets.
Tighten the 9 bolts and the 7 screws.
Remove the protective tape.
 |
| 6. INSTALL FRONT BUMPER COVER (w/ Small Front Spoiler) |
Install the 2 clips, the screw grommet and the 10 spring nuts.
 |
Engage the 6 claws and install the front bumper cover.
|
Connect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, connect the connectors.
Install the 6 clips.
 |
Install the 2 screw grommets.
Tighten the 5 screws and the 3 bolts.
Remove the protective tape.
|
| 7. INSTALL FRONT BUMPER COVER (w/o Front Spoiler) |
Install the 2 clips and the screw grommet.
 |
Engage the 6 claws and install the front bumper cover.
|
Connect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, connect the connectors.
Install the 6 clips.
 |
Install the 2 screw grommets.
Tighten the 7 screws and the 3 bolts.
Remove the protective tape.
|
| 8. INSTALL FRONT SPOILER COVER (w/ Front Spoiler) |
Install the front spoiler cover with the 2 screws and the 10 bolts.
 |
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}