Outer Mirror Switch (For Hatchback) Inspection

Vehicle Exterior. Yaris. Ncp93, 131
Mirror (Ext). Yaris. Ncp93, 131

  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY

Outer Mirror Switch (For Hatchback) -- Inspection



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


    Yaris. Ncp93, 131.Mirror (Ext).Power Mirror Control System (For Sedan).Outer Mirror Switch (For Hatchback)  Inspection
  1. Check the resistance.

    Text in Illustration
    *1
    Left / Right Select Switch
    *2
    Adjustment Switch
    *a
    Component without harness connected
    (Outer Mirror Switch Assembly)

    1. Select "L" on the left/right select switch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      4 (VL) - 8 (B)
      6 (M+) - 7 (E)
      UP
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      4 (VL) - 7 (E)
      6 (M+) - 8 (B)
      DOWN
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      5 (HL) - 8 (B)
      6 (M+) - 7 (E)
      LEFT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      5 (HL) - 7 (E)
      6 (M+) - 8 (B)
      RIGHT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch.
    3. Select "R" on the left/right select switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      3 (VR) - 8 (B)
      6 (M+) - 7 (E)
      UP
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      3 (VR) - 7 (E)
      6 (M+) - 8 (B)
      DOWN
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      2 (HR) - 8 (B)
      6 (M+) - 7 (E)
      LEFT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      2 (HR) - 7 (E)
      6 (M+) - 8 (B)
      RIGHT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch.