Outer Rear View Mirror (For Sedan) Installation

Engage the claw on the lower part of the mirror cover.

Engage the claw on the upper part of the mirror cover.

After installing the outer mirror cover, check that there are no gaps between the cover and the mirror body.

NOTICE:

If there is a gap between the cover and the mirror body, it may cause noise during driving.

Engage the 2 claws of the outer rear view mirror grass.

Engage the 2 clips and install the outer rear view mirror grass.

Engage the claw and install the outer rear view mirror with the 3 nuts.

Torque:

8.0 N*m{82 kgf*cm, 71 in.*lbf}

w/ Power mirror:
Connect the connector.

w/ Power window:

1. Connect the front door lock remote control cable and front door inside locking cable.
   





2. Engage the 9 clips and install the front door trim board.
   





3. Tighten the screw.
   

w/o Power window:

1. Connect the front door lock remote control cable and front door inside locking cable.
   





2. Engage the 9 clips and install the front door trim board.
   





3. Tighten the screw.
   

Engage the claw and clip and install the front door lower frame bracket garnish.

for Driver side with power window:

1. Connect the connector.
   

2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.
   

3. Tighten the screw.
   

for Front passenger side with power window:

1. Connect the connector.
   

2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.
   

3. Tighten the screw.
   

w/o Power window:

1. Engage the 5 clips and 2 clips and install the front armrest base upper panel.
   

2. Tighten the screw.
   

Install the window regulator handle plate.

Open all the windows.

Install the front door window regulator handle with the clip at the angle shown in the illustration.