Vehicle Exterior. Yaris. Ncp93, 131
Door Hatch. Yaris. Ncp93, 131
Back Door Opener Switch (For Hatchback) -- Installation |
| 1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY |
Install the back door opener switch.
- HINT:
- Make sure the arrows on the back door opener switch and the back door garnish are pointing in the same direction.
| 2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Engage the 2 clips and install the back door outside garnish.
Tighten the 3 nuts.
- Torque:
- 4.9 N*m{50 kgf*cm, 43 in.*lbf}
Connect the connectors.
| 3. INSTALL BACK DOOR GARNISH NO. 2 RETAINER (w/ Cover) |
Install the back door garnish No. 2 retainer with the 2 nuts.
- Torque:
- 4.9 N*m{50 kgf*cm, 43 in.*lbf}
 |
| 4. INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder) |
Engage the 2 claws and install the back door lock cylinder.
 |
Install the back door lock cylinder with the 2 nuts.
- Torque:
- 4.9 N*m{50 kgf*cm, 43 in.*lbf}
 |
Connect the connector.
| 5. INSTALL REAR WIPER MOTOR ASSEMBLY |
| 6. INSTALL BACK DOOR TRIM BOARD |
Engage the 11 clips and install the back door trim board.
 |