Air Conditioning Pressure Sensor (For Hatchback) Removal

Vehicle Interior. Yaris. Ncp93, 131
Heating Air Conditioning. Yaris. Ncp93, 131

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

  2. REMOVE AIR CONDITIONER PRESSURE SENSOR

Air Conditioning Pressure Sensor (For Hatchback) -- Removal



1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

  1. Start up the engine.

  1. A/C switch on.

  1. Turn the blower switch to on.

  1. Operate the cooler compressor with an engine speed of approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the remaining compressor oil from each component, in the cooler compressor.

  1. Stop the engine.



    Yaris. Ncp93, 131.Heating Air Conditioning.Air Conditioning System (For Sedan).Air Conditioning Pressure Sensor (For Hatchback) Removal

  1. Remove the caps from the service valves on the refrigerant line.

    Text in Illustration
    *1
    		High Pressure Service Valve
    *2
    		Low Pressure Service Valve

  1. Connect the refrigerant recovery unit.

  1. Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.

    HINT:
    Use the refrigerant recovery unit in accordance with the manufacturer's instruction manual.


2. REMOVE AIR CONDITIONER PRESSURE SENSOR

  1. Disconnect the connector



    Yaris. Ncp93, 131.Heating Air Conditioning.Air Conditioning System (For Sedan).Air Conditioning Pressure Sensor (For Hatchback) Removal

  1. Using a deep socket wrench 27 mm, remove the pressure sensor.

    Text in Illustration
    *a
    		Turn
    *b
    		Hold
    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.