Seat Belt Warning System (For Hatchback) Data List / Active Test

Vehicle Interior. Yaris. Ncp93, 131
Seat Belt. Yaris. Ncp93, 131

  1. DATA LIST

  1. ACTIVE TEST

Seat Belt Warning System (For Hatchback) -- Data List / Active Test



DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / (desired system) / Data List.

  5. According to the display on the Techstream, read the Data List.

    SRS Airbag
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Passenger Classification
    		Front passenger side seat condition /NG, OFF, Child, AF05, AM50 or Fail
    		NG: Data not determined
    OFF: Vacant
    Child: Child seated
    AF05: Adult seated
    AM50: Adult seated
    Fail: A failure is detected
    		-
    Left side Buckle SW
    		Driver side seat belt buckle switch/Unset, Set or NG
    		Unset: Driver side seat belt unfastened
    Set: Driver side seat belt fastened
    NG: Data not determined
    		-
    Right side Buckle SW
    		Front passenger side seat belt buckle switch/Unset, Set or NG
    		Unset: Front passenger side seat belt unfastened
    Set: Front passenger side seat belt fastened
    NG: Data not determined
    		-

    Occupant Detection
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Passenger Buckle SW
    		Front passenger side seat belt buckle switch/Unset, Set or NG
    		Unset: Front passenger side seat belt unfastened
    Set: Front passenger side seat belt fastened
    NG: Data not determined
    		-
    Passenger Classification
    		Front passenger side seat condition/CRS, AM50, AF05, Child or OFF
    		CRS: Child restraint system
    AM50: Adult seated
    AF05: Adult seated
    Child: Child seated
    OFF: Vacant
    		-

    Combination Meter
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Driver Side Seatbelt Warning Buzzer
    		Driver side seat belt warning buzzer/OFF or ON
    		Customized value displayed
    		-
    P-Seatbelt Warning Buzzer
    		Front passenger side seat belt warning buzzer/OFF or ON
    		Customized value displayed
    		-


ACTIVE TEST
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

  5. According to the display on the Techstream, perform the Active Test.

    Combination Meter
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Driver Side Seat Belt
    		Driver side seat belt warning light
    		OFF or ON
    		Confirm that the vehicle is stopped with the engine idling.