Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131
Seat Position Sensor (For Hatchback) -- Installation |
- CAUTION:
- Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000KT10EAX.html).
| 1. INSTALL SEAT POSITION AIRBAG SENSOR |
Using a 1.3 mm (0.0512 in.) feeler gauge, temporarily install the seat position airbag sensor with the screw.
Text in Illustration *1 Seat Position Airbag Sensor *2 Feeler Gauge *3 Front Seat Cushion Bracket - NOTICE:
- If the seat position airbag sensor has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the seat position airbag sensor with a new one.
- When installing the seat position airbag sensor, be careful that the SRS wiring does not interfere with or is pinched between other parts.
- HINT:
- Be sure that the clearance between the seat position airbag sensor and front seat cushion bracket is between 0.6 mm (0.0236 in.) and 2.0 mm (0.0787 in.).
 |
Using a T30 "TORX" socket wrench, tighten the screw to install the seat position airbag sensor.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Make sure that the clearance between the seat position airbag sensor and front seat cushion bracket is between 0.6 mm (0.0236 in.) and 2.0 mm (0.0787 in.).
Connect the connector.
Check that there is no looseness in the installation of the seat position airbag sensor.
| 2. INSTALL SEAT SLIDE POSITION SENSOR PROTECTOR |
Engage the clip to the seat slide position sensor protector.
| 3. INSTALL FRONT SEAT ASSEMBLY LH |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}