Seat Position Sensor (For Sedan) Removal

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY

  3. REMOVE FRONT SEAT ASSEMBLY LH

  4. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR

  5. REMOVE SEAT POSITION AIRBAG SENSOR

Seat Position Sensor (For Sedan) -- Removal


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
NOTICE:
Always use "Torx" socket wrench E10 when removing the front seat.
HINT:
Installation is in the reverse order of removal.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT SEAT HEADREST ASSEMBLY


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Seat Position Sensor (For Sedan) Removal

  1. Push in the lock button of the front seat headrest support and remove the front seat headrest.



3. REMOVE FRONT SEAT ASSEMBLY LH


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Seat Position Sensor (For Sedan) Removal

  1. w/Front passenger airbag:

    1. Using a clip remover, remove the clamp.

    2. Slide the slider and disconnect the airbag connector.

    3. Disconnect the buckle switch connector.



  1. w/o Front passenger airbag:



      Yaris. Ncp93, 131

    1. Disconnect the buckle switch connector.



    Yaris. Ncp93, 131

  1. Move the front seat to its most rearward position.

  1. Using "TORX" socket wrench E10, remove the 2 bolts from the front side.

  1. Move the front seat to its most forward position.

  1. Using "TORX" socket wrench E10, remove the 2 bolts from the rear side.

  1. Remove the front seat.



4. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR

  1. Remove the seat slide position sensor protector from the seat position airbag sensor.



5. REMOVE SEAT POSITION AIRBAG SENSOR


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Seat Position Sensor (For Sedan) Removal

  1. Disconnect the connector from the seat position airbag sensor.

  1. Using "Torx" socket wrench T30, remove the torx screw and the seat position airbag sensor.