Front Passenger Airbag Assembly (For Hatchback) Disposal

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (When Installed in Vehicle)

  2. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY INFLATOR (When not Installed in Vehicle)

  3. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY ACTUATOR (When not Installed in Vehicle)

Front Passenger Airbag Assembly (For Hatchback) -- Disposal


CAUTION:
Before performing pre-disposal deployment of any SRS part, review and closely follow all applicable environmental and hazardous material regulations. Predisposal deployment may be considered hazardous material treatment.
HINT:
When scrapping a vehicle equipped with an SRS or disposing of the instrument panel passenger airbag assembly, be sure to deploy the airbag first in accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the Service Dept. of TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
  1. An airbag or pretensioner may be activated by static electricity. To prevent this, be sure to touch a metal surface with bare hands to discharge static electricity before performing this procedure.
  2. Never dispose of a instrument panel passenger airbag assembly that has an undeployed airbag.
  3. The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby residents.
  4. When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical noise.
  5. When deploying the airbag, perform the operation at least 10 m (33 ft.) away from the instrument panel passenger airbag assembly.
  6. The instrument panel passenger airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
  7. Use gloves and safety glasses when handling a instrument panel passenger airbag assembly a deployed airbag.
  8. Do not apply water, etc. to a instrument panel passenger airbag assembly with a deployed airbag.
  9. Always wash your hands with water after completing the operation.


1. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (When Installed in Vehicle)
HINT:
Prepare a battery as the power source to deploy the airbag.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

  1. Check the function of SST.

    SST
    09082-00700
    CAUTION:
    Always use the specified SST (SRS Airbag Deployment Tool) when deploying the airbag.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

      Text in Illustration
      *1
      		Battery
      SST
      09082-00700

    2. Press the SST activation switch, and check that the LED on the SST activation switch illuminates.

      CAUTION:
      1. Do not connect the SST connector (yellow colored one) to the airbag.
      2. If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not use SST.

    3. Disconnect SST from the battery.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  1. Remove the instrument cluster finish panel garnish assembly (YARIS_NCP93 RM000001RHD01QX_03_0075.html).



  1. Install SST to the instrument panel wire inflator side.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    1. Pull the slider in the direction indicated by the arrow to release the lock and disconnect the 2 airbag connectors.

      Text in Illustration
      *1
      		Slider
      *2
      		Airbag Connector
      *3
      		Vent Hole Connector
      NOTICE:
      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Connect SST connector to the instrument panel wire airbag connector side.

      SST
      09082-00700
      09082-00780
      09082-00760
      NOTICE:
      1. To avoid damaging SST connector and the wire harness, do not lock the secondary lock of the twin lock.
      2. At this time, do not connect SST to the instrument panel wire vent hole connector side.

    3. Check that the lock slider is in the lock position.



      4. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    4. Connect SST connector.

      NOTICE:
      Take care not to damage SST wire harness.

    5. Close all doors.



      6. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    6. Move SST at least 10 m (33 ft.) away from the vehicle front side window.

      Text in Illustration
      *1
      		Battery

  1. Deploy the instrument panel passenger airbag assembly inflator.

    1. Check that no one is inside the vehicle or within a 10 m (33 ft.) radius of the vehicle.

    2. Press SST activation switch and deploy the airbag.

      CAUTION:
      1. When deploying the airbag, make sure that no one is near the vehicle.
      2. The instrument panel passenger airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
      3. Use gloves and safety glasses when handling a instrument panel passenger airbag assembly with a deployed airbag.
      4. Do not apply water, etc. to a instrument panel passenger airbag assembly with a deployed airbag.
      5. Always wash your hands with water after completing the operation.
      HINT:
      The airbag is deployed as the LED of SST activation switch comes on.


  1. Install SST to the instrument panel wire vent hole connector side.

    CAUTION:
    Before performing this procedure, be sure to wait 30 minutes or more after performing the procedure to deploy the instrument panel passenger airbag assembly inflator with the instrument panel passenger airbag assembly installed to the vehicle.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    1. Pull the slider in the direction indicated by the arrow to release the lock and disconnect SST connector from the instrument panel wire airbag connector side.

      Text in Illustration
      *1
      		Slider
      HINT:
      Take care not to damage SST wire harness.

    2. Connect SST connector to the instrument panel wire vent hole connector side.

      NOTICE:
      To avoid damaging SST connector and the wire harness, do not lock the secondary lock of the twin lock.


      3. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    3. Connect SST connector.

      NOTICE:
      Take care not to damage SST wire harness.

  1. Deploy the front passenger airbag actuator.

    1. Check that no one is inside the vehicle or within a 10 m (33 ft.) radius of the vehicle.

    2. Press SST activation switch and deploy the actuator.

      CAUTION:
      1. When deploying the airbag, make sure that no one is near the vehicle.
      2. The instrument panel passenger airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
      3. Use gloves and safety glasses when handling a instrument panel passenger airbag assembly with a deployed airbag.
      4. Do not apply water, etc. to a instrument panel passenger airbag assembly with a deployed airbag.
      5. Always wash your hands with water after completing the operation.
      HINT:
      The airbag is deployed as the LED of SST activation switch comes on.


2. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY INFLATOR (When not Installed in Vehicle)
HINT:
Prepare a battery as the power source to deploy the airbag.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

  1. Check the function of SST.

    SST
    09082-00700
    CAUTION:
    Always use the specified SST (SRS Airbag Deployment Tool) when deploying the airbag.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

      Text in Illustration
      *1
      		Battery
      SST
      09082-00700

    2. Press the SST activation switch, and check that the LED on the SST activation switch illuminates.

      CAUTION:
      1. Do not connect the SST connector (yellow colored one) to the airbag.
      2. If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not use SST.

    3. Disconnect SST from the battery.

  1. Remove the instrument panel passenger airbag assembly (YARIS_NCP93 RM000000V7201JX.html).

    CAUTION:
    1. Before removing the instrument panel passenger airbag assembly, wait at least 90 seconds after turning the power switch off and disconnecting the cable from the negative (-) battery terminal.
    2. When storing the instrument panel passenger airbag assembly, keep the airbag deployment side facing upward.


  1. Connect SST.



      Yaris. Ncp93, 131

    1. Connect the 2 SST connectors to the instrument panel passenger airbag assembly inflator.

      SST
      09082-00802(09082-10801,09082-30801)
      Text in Illustration
      *1
      		Locking Button

    2. Push in the locking button.

      NOTICE:
      1. Be sure to only connect the connectors to each corresponding color.
      2. Securely lock the locking button.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

  1. Using a braided wire harness, tie the instrument panel passenger airbag assembly to a tire.

    Text in Illustration
    *a
    		Stripped Wire Harness Section
    Stripped wire harness section:
    Area
    		Measurement
    A
    		1.25 mm2 or more (0.00192 in.2 or more)
    CAUTION:
    If the wire harness is too thin or an alternative object is used to tie the instrument panel passenger airbag assembly, it may be snapped by the shock when the airbag is deployed. Always use a wire harness for vehicle use with a cross-sectional area of at least 1.25 mm2 (0.0019 in.2).
    HINT:
    To calculate the cross-sectional area of the stripped wire harness section:
    Cross-sectional area = 3.14 x (Diameter)2 / 4



    1. Position the instrument panel passenger airbag assembly inside a tire with the airbag deployment side facing inside.


      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

      Tire size:
      Area
      		Measurement
      A
      		360 mm (14.17 in.)
      B
      		185 mm (7.28 in.)
      CAUTION:
      1. Make sure that the wire harnesses are tight. If there is slack in the wire harnesses, the instrument panel passenger airbag assembly may become loose due to the shock when the airbag is deployed.
      2. Always tie down the instrument panel passenger airbag assembly with the airbag deployment side facing inside the tire.
      NOTICE:
      The tire will be marked by the airbag deployment, so use a waste tire.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

  1. Place tires.

    Text in Illustration
    *1
    		Tires (2 or more)

    1. Place at least 2 tires under the tire which the instrument panel passenger airbag assembly is tied to.

    2. Place at least 2 tires over the tire which the instrument panel passenger airbag assembly is tied to. The top tire should have a disc wheel installed.

      NOTICE:
      1. Do not place SST connector under the tire because it could be damaged.
      2. As the disc wheel will be marked by the airbag deployment, use a waste disc wheel.
      3. As the tires will be marked by the airbag deployment, use waste tires.


      3. Yaris. Ncp93, 131

    3. Tie the tires together with 2 wire harnesses.

      CAUTION:
      Make sure that the wire harnesses are tight. Looseness in the wire harnesses results in the tires coming free due to the shock when the airbag is deployed.


  1. Install SST.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    1. Connect SST connector.

      Text in Illustration
      *1
      		Battery
      SST
      09082-00700
      NOTICE:
      Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness. Also, secure some slack for SST wire harness inside the tire.

  1. Deploy the instrument panel passenger airbag assembly inflator.

    1. Check that no one is within a 10 m (33 ft.) radius of the tire which the instrument panel passenger airbag assembly is tied to.

    2. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

    3. Press SST activation switch and deploy the airbag.

      CAUTION:
      Make sure that no one is near the tires when deploying the airbag.
      HINT:
      The airbag is deployed as the LED of SST activation switch comes on.

    4. Disconnect the red clip of SST from the positive (+) battery terminal and the black clip of SST from the negative (-) battery terminal.



3. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY ACTUATOR (When not Installed in Vehicle)
CAUTION:
Before performing this procedure, be sure to wait 30 minutes or more after performing the procedure to deploy the instrument panel passenger airbag assembly inflator with the instrument panel passenger airbag assembly removed from the vehicle.
NOTICE:
Be sure to follow the procedure detailed below when deploying the airbag.


  1. Connect SST connector.

    1. Check that the tires used when deploying the instrument panel passenger airbag assembly inflator are not damaged.

      CAUTION:
      If the tires are damaged, replace the tires.

    2. Check that the wire harnesses used to tie the instrument panel passenger airbag assembly are not severed.

      CAUTION:
      If any of the wire harnesses are severed, retie the airbag with new wire harnesses.

    3. Disconnect the 2 SST connectors from the instrument panel passenger airbag assembly inflator.



      4. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    4. Connect SST connector to the instrument panel passenger airbag assembly actuator.

      SST
      09082-50800
      Text in Illustration
      *1
      		Locking Button

    5. Push in the locking button.

      NOTICE:
      Securely lock the locking button.


  1. Install SST.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

    1. Connect SST connector.

      SST
      09082-00700
      Text in Illustration
      *1
      		Battery
      NOTICE:
      Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness. Also, secure some slack for SST wire harness inside the tire.

  1. Deploy the instrument panel passenger airbag assembly actuator.

    1. Check that no one is within a 10 m (33 ft.) radius of the tire which the instrument panel passenger airbag assembly is tied to.

    2. Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) terminal.

    3. Press SST activation switch and deploy the airbag.



    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Disposal

  1. Dispose of the instrument panel passenger airbag assembly.

    Text in Illustration
    *1
    		Plastic Bag
    CAUTION:
    1. The lower instrument panel passenger airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
    2. Use gloves and safety glasses when handling a lower instrument panel passenger airbag assembly which has been deployed.
    3. Do not apply water, etc. to a lower instrument panel passenger airbag assembly which has been deployed.
    4. Always wash your hands with water after completing the operation.

    1. Remove the lower instrument panel passenger airbag assembly from the tire.

    2. Place the lower instrument panel passenger airbag assembly in a plastic bag, tie it tightly and dispose of it according to local regulations.