Front Passenger Airbag Assembly (For Hatchback) Removal

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

  4. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

  5. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

  6. REMOVE FRONT PASSENGER AIRBAG CONNECTOR COVER

  7. REMOVE NO. 2 INSTRUMENT PANEL WIRE

Front Passenger Airbag Assembly (For Hatchback) -- Removal


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000KT10EAX.html).


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (YARIS_NCP93 RM00000482M008X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(YARIS_NCP93 RM000001RHD01QX.html)


4. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    Yaris. Ncp93, 131

  1. Remove the 4 <A> screws and disengage the 4 guides and remove the heater to register duct.



5. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Removal

  1. Remove the 2 screws.

  1. Disengage the clamp.

  1. Disengage the 3 hooks A.

  1. Disengage the 3 hooks B to remove the instrument panel passenger airbag assembly as shown in the illustration.



6. REMOVE FRONT PASSENGER AIRBAG CONNECTOR COVER


    Yaris. Ncp93, 131

  1. Disengage the 8 claws to remove the front passenger airbag connector cover.



7. REMOVE NO. 2 INSTRUMENT PANEL WIRE


Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Hatchback) Removal

  1. Using a thin-bladed screwdriver with its tip wrapped with protective tape, 3 release the locking buttons.

  1. Disconnect the vent hole connector.

  1. Disconnect the 2 airbag connectors and remove the No. 2 instrument panel wire.

    Text in illustration
    *1
    		Protective Tape
    *2
    		Locking Button
    *3
    		Vent Hole Connector
    *4
    		Airbag Connector