Steering Pad (For Hatchback) Installation

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. INSTALL STEERING PAD

  2. INSTALL LOWER NO. 2 STEERING WHEEL COVER

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. INSPECT SRS WARNING LIGHT

Steering Pad (For Hatchback) -- Installation


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000KT10EAX.html).


1. INSTALL STEERING PAD

  1. Check that the ignition switch is off.

  1. Check that the cable is disconnected from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Steering Pad (For Hatchback) Installation

  1. Connect the 2 airbag connectors.

    Text in Illustration
    *1
    		Locking Button
    NOTICE:
    1. Do not damage the airbag wire harness when connecting the airbag connector.
    2. Be sure to only connect the connectors to each corresponding color.
    3. Securely lock the locking button.

  1. Connect the horn terminal.



    Yaris. Ncp93, 131

  1. Engage the 3 pins with the 3 snap rings to install the steering pad.

    NOTICE:
    Pull the steering pad to ensure that it is securely engaged.


2. INSTALL LOWER NO. 2 STEERING WHEEL COVER

  1. Engage the 2 claws to install the lower No. 2 steering wheel cover.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N*m{55 kgf*cm, 48 in.*lbf}


4. INSPECT SRS WARNING LIGHT
(YARIS_NCP93 RM000000XFD0E4X.html)