Airbag System (For Sedan) Data List / Active Test

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY

Airbag System (For Sedan) -- Data List / Active Test


HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY

  1. Warm up the engine.

  2. Turn the ignition switch to OFF.

  3. Connect the Techstream to the DLC3.

  4. Turn the ignition switch to ON.

  5. Turn the tester ON.

  6. Enter the following menus: Body Electrical / SRS Airbag / Data List /

  7. According to the display on tester, read the "Data List".

    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Driver Seat Position
    		Seat position (Driver side)/
    FORWARD: Seat position forward
    BKWARD: Seat position backward
    FAIL: Failure detected
    		FORWARD/BKWARD
    		-
    Passenger Classification
    		Front passenger classification/
    NG: Data not determined
    OFF: Vacant
    CHILD: Child (Less than 36 kg [79.37 lb]) seated
    AF05: Adult (36 to 54 kg [79.37 to 119.05 lb]) seated
    AM50: Adult (More than 54 kg [119.05 lb]) seated
    FAIL: Failure detected
    		NG/OFF/CHILD/AF05/AM50/FAIL
    		-
    Driver Buckle SW
    		Buckle switch (Driver side)/
    UNSET: Seat belt not fastened
    SET: Seat belt fastened
    NG: Data not determined
    		UNSET/SET
    		-
    Passenger Buckle SW
    		Buckle switch (Front passenger side)/
    UNSET: Seat belt not fastened
    SET: Seat belt fastened
    NG: Data not determined
    		UNSET/SET
    		-
    Display Type Information
    		Display type identification information/
    LR: Display indicated by LH/RH
    DP: Display indicated by Driver/Passenger
    		DP
    		-
    Number of Past DTC
    		Number of past DTCs/
    Min.: 0, Max.: 255
    		0
    		-