Vehicle Interior. Yaris. Ncp93, 131
Door Lock. Yaris. Ncp93, 131
Door Control Receiver (For Sedan) -- Installation |
| 1. INSTALL DOOR CONTROL RECEIVER |
Install the door control receiver with the bolt.
- Torque:
- 7.4 N*m{75 kgf*cm, 65 in.*lbf}
Connect the connector.
| 2. INSTALL ROOF SIDE INNER GARNISH LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189G063X_04_0123.html).
| 3. INSTALL REAR SEAT SIDE COVER LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189G063X_04_0125.html).
| 4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189G063X_04_0127.html).
| 5. INSTALL REAR DOOR SCUFF PLATE LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189G063X_04_0129.html).
| 6. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) |
Engage the 3 hooks and install the rear seatback.
 |
Tighten the 3 bolts.
- Torque:
- 7.9 N*m{80 kgf*cm, 70 in.*lbf}
Install the rear seat outer belt into the rear seat shoulder belt guide.
- HINT:
- Use the same procedure for both sides.
 |
Install the rear center seat outer belt into the rear center seat shoulder belt guide.
| 7. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type LH Side) |
Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
- Torque:
- 37 N*m{375 kgf*cm, 27 ft.*lbf}
 |
Install the rear seatback cover with the 2 clips.
 |
Pull up the rear seatback.
Install the rear seat outer belt into the rear seat shoulder belt guide.
 |
| 8. INSTALL REAR SEAT CUSHION PAD ASSEMBLY |
Pass the rear seat inner belt through the rear seat cushion cover pad slit.
 |
Engage the 3 hooks and install the rear seat cushion cover pad.
- NOTICE:
- Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.