Rear Door Lock (For Sedan) Inspection

w/ Power door lock:
Check the operation.

1. Apply battery voltage to the rear door lock and check the operation of the door lock motor.
   

   Standard:

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1	Locks
   Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4	Unlocks

   If the result is not as specified, replace the rear door lock.
   

Check the resistance of the unlock detection switch.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Door Lock Condition	Specified Condition
   6 - 9	Locked	10 kΩ or higher
   6 - 9	Unlocked	Below 1 Ω

   If the result is not as specified, replace the rear door lock.
   

w/ Power door lock:
Check the operation.

1. Apply battery voltage to the rear door lock and check the operation of the door lock motor.
   

   Standard:

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1	Locks
   Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4	Unlocks

   If the result is not as specified, replace the rear door lock.
   

Check the resistance of the unlock detection switch.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Door Lock Condition	Specified Condition
   6 - 9	Locked	10 kΩ or higher
   6 - 9	Unlocked	Below 1 Ω

   If the result is not as specified, replace the rear door lock.