INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type)
INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type)
INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type)
INSTALL REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type)
INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type)
Rear Package Tray Speaker (For Sedan) -- Installation |
- HINT:
- The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
| 1. INSTALL REAR SPEAKER ASSEMBLY |
Install the rear speaker with the 4 bolts.
 |
Connect the speaker connector.
| 2. INSTALL PACKAGE TRAY TRIM PAD |
Install the package tray trim pad.
 |
| 3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY |
Engage the 5 claws and install the package tray trim.
 |
Install the 4 clips.
| 4. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY (w/o Rear Spoiler) |
Connect the connector.
 |
Engage the 4 claws and install the high mounted stop light assembly.
| 5. INSTALL ROOF SIDE INNER GARNISH RH |
w/ Curtain Shield Airbag:
Install a new special clip and the clip onto the roof side inner garnish.
Engage the 4 clips and the claw and install the roof side inner garnish.
 |
w/o Curtain Shield Airbag:
Engage the 4 clips and the claw and install the roof side inner garnish.
 |
| 6. INSTALL ROOF SIDE INNER GARNISH LH |
- HINT:
- Use the same procedure as for the RH side.
| 7. INSTALL REAR SEAT SIDE COVER RH |
Engage the 2 clips and the 4 claws and install the rear seat side cover.
 |
| 8. INSTALL REAR SEAT SIDE COVER LH |
- HINT:
- Use the same procedure as for the RH side.
| 9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
 |
Install the rear door opening trim weatherstrip.
| 10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
- HINT:
- Use the same procedure as for the RH side.
| 11. INSTALL REAR DOOR SCUFF PLATE RH |
Engage the 7 claws and install the rear door scuff plate.
 |
| 12. INSTALL REAR DOOR SCUFF PLATE LH |
- HINT:
- Use the same procedure as for the RH side.
| 13. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) |
 |
w/ Grand Spare Tire:
Install the luggage compartment trim inner pad.
w/o Grand Spare Tire:
Install the luggage compartment trim inner pad.
 |
| 14. INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type) |
 |
Install the spare wheel cover.
| 15. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) |
 |
Install the luggage compartment floor mat.
| 16. INSTALL REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type) |
Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
- Torque:
- 37 N*m{375 kgf*cm, 27 ft.*lbf}
 |
Install the rear seatback cover with the 2 clips.
 |
Pull up the rear seatback.
Install the rear seat outer belt into the rear seat shoulder belt guide.
 |
Install the rear center seat outer belt into the rear center seat shoulder belt guide.
| 17. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type) |
Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
- Torque:
- 37 N*m{375 kgf*cm, 27 ft.*lbf}
 |
Install the rear seatback cover with the 2 clips.
 |
Pull up the rear seatback.
Install the rear seat outer belt into the rear seat shoulder belt guide.
 |
| 18. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) |
Engage the 3 hooks and install the rear seatback.
 |
Tighten the 3 bolts.
- Torque:
- 7.9 N*m{80 kgf*cm, 70 in.*lbf}
Install the rear seat outer belt into the rear seat shoulder belt guide.
- HINT:
- Use the same procedure for both sides.
 |
Install the rear center seat outer belt into the rear center seat shoulder belt guide.
| 19. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
for 60/40 Split Seat Type:
Install the rear seat cushion cover pad sub-assembly (YARIS_NCP93 RM0000026GB00WX_01_0003.html).
for Fixed Seat Type:
Install the rear seat cushion cover pad sub-assembly (YARIS_NCP93 RM000001GLY00YX_02_0014.html).
| 20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}