Rear Door Speaker (For Hatchback) Installation

Using an air riveter or hand riveter, install the rear speaker assembly onto the rear door panel with 3 new strike rivets.

HINT:

Install the new strike rivets in the order shown in the illustration.

NOTICE:

1. Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
   


2. Confirm that the rivets are seated properly against the speaker.
   
3. Do not tilt the riveter when installing the rivet onto the speaker.
   
4. Do not leave any space between the rivet head and speaker.
   


5. Do not leave any space between the speaker and door. Firmly hold the 2 items together while installing the rivet.
   

Connect the connector.

Connect the rear door lock remote control cable and the rear door inside locking cable to the rear door inside handle.

Engage the 7 clips and install the rear door trim board.

Install the 3 screws.

Engage the claw and close the cover.

Connect the connector.

Engage the 9 claws and 3 guides, and install the rear armrest base upper panel.

Engage the 5 claws and 2 guides, and install the front armrest base upper panel.

Install the window regulator handle plate.

Open all the windows.

Install the rear door window regulator handle with the clip at the angle shown in the illustration.

Engage the guide.

Engage the 2 clips and claw and install the rear door frame garnish.