Parking Brake Cable (For Hatchback Disc Type) Removal

Brake. Yaris. Ncp93, 131
Parking Brake. Yaris. Ncp93, 131

  1. REMOVE REAR CONSOLE BOX ASSEMBLY

  2. LOOSEN PARKING BRAKE CABLE

  3. REMOVE REAR WHEEL

  4. REMOVE FRONT NO. 4 FLOOR HEAT INSULATOR

  5. REMOVE FUEL TANK COVER VENT CASE SUB-ASSEMBLY

  6. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

  7. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

Parking Brake Cable (For Hatchback Disc Type) -- Removal



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(YARIS_NCP93 RM000003726005X.html)


2. LOOSEN PARKING BRAKE CABLE


Yaris. Ncp93, 131.Parking Brake.Parking Brake System (For Sedan).Parking Brake Cable (For Hatchback Disc Type) Removal

  1. Loosen the equalizer and lock nut.

    Text in Illustration
    *1
    		Parking Brake Equalizer
    *2
    		Lock Nut
    NOTICE:
    Do not reuse the loosened nut.


3. REMOVE REAR WHEEL


4. REMOVE FRONT NO. 4 FLOOR HEAT INSULATOR


    Yaris. Ncp93, 131

  1. Remove the 2 nuts and the front No. 4 floor heat insulator.



5. REMOVE FUEL TANK COVER VENT CASE SUB-ASSEMBLY


    Yaris. Ncp93, 131

  1. Pinch and remove the clip as shown in the illustration.

  1. Remove the bolt and the fuel tank cover vent case sub-assembly.



6. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    Yaris. Ncp93, 131.Parking Brake.Parking Brake System (For Sedan).Parking Brake Cable (For Hatchback Disc Type) Removal

  1. Separate the parking brake cable from the parking brake equalizer

    Text in Illustration
    *1
    		Parking Brake Equalizer
    *2
    		No. 2 parking brake cable assembly
    *3
    		No. 3 parking brake cable assembly


  1. Remove cable clamp A from the body.


    Yaris. Ncp93, 131.Parking Brake.Parking Brake System (For Sedan).Parking Brake Cable (For Hatchback Disc Type) Removal

  1. Remove the 5 bolts.

  1. Remove cable clamp B from the rear axle beam.



    Yaris. Ncp93, 131

  1. Separate the No. 3 parking brake cable assembly from the rear disc brake operation lever.



    Yaris. Ncp93, 131.Parking Brake.Parking Brake System (For Sedan).Parking Brake Cable (For Hatchback Disc Type) Removal

  1. Insert an offset wrench 14 mm at the base of the parking brake cable as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder.

    Text in Illustration
    *1
    		No. 3 Parking Brake Cable Assembly
    *2
    		Clip
    *3
    		Offset Wrench 14 mm


7. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT:
Use the same procedure for the RH side as for the LH side.