Rear Brake (For Hatchback Disc Type) Reassembly

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal as shown in the illustration.

Install the piston seal to the rear disc brake cylinder.

NOTICE:

Securely install the piston seal into the groove of the rear disc brake cylinder.

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot as shown in the illustration.

Apply a light layer of lithium soap base glycol grease to the entire circumference of the rear disc brake piston as shown in the illustration.

Install the cylinder boot to the rear disc brake piston.

NOTICE:

Do not install the cylinder boot after installing the piston into the disc brake cylinder.

Install the seal portion of the cylinder boot into the groove portion of the rear disc brake cylinder.

NOTICE:

Securely install the cylinder boot to the groove of the rear disc brake cylinder.

Using SST, screw the piston to the end by turning it clockwise as far as possible.

SST

09719-12010(09719-01030)

NOTICE:

1. Securely install the cylinder boot to the groove of the piston.
   
2. Do not damage the piston or cylinder boot.
   

HINT:

For the RH side, turn the piston counterclockwise.

Using SST, slowly turn the piston counterclockwise until the piston groove is positioned as shown in the illustration.

HINT:

1. When installing the disc brake cylinder to the disc cylinder mounting, align the piston groove with the protrusion on the brake pad.
   
2. For the RH side, turn the piston clockwise.
   

Make sure that the cylinder boot is securely installed into the groove of the disc brake cylinder and disc brake piston.