Rear Brake (For Sedan) Disassembly

Using SST, separate the shoe return spring from the front brake shoe.

SST

09703-30010

NOTICE:

Do not damage the wheel cylinder boot.

Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.

SST

09718-00010

Remove the tension spring.

Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.

Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.

SST

09718-00010

Using needle-nose pliers, separate the parking brake cable.

Remove the automatic adjust lever tension spring and remove the automatic adjust lever.

Using a screwdriver, remove the C-washer and remove the parking brake shoe lever.

Using a union nut wrench, separate the brake tube from the rear wheel brake cylinder.

HINT:

Use a container to catch the brake fluid.

Remove the bleeder plug cap.

Remove the bleeder plug.

Remove the bolt and remove the rear wheel brake cylinder.

Remove the 2 wheel cylinder boots from the wheel brake cylinder.

Remove the 2 pistons.

Remove the compression spring.

Remove the wheel cylinder cup from each piston.