Brake Pedal (For Sedan) -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
2. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH |
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 |
6. REMOVE COMBINATION METER ASSEMBLY |
7. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
8. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
9. REMOVE FRONT PILLAR GARNISH RH |
10. REMOVE FRONT PILLAR GARNISH LH |
11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
12. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
13. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
14. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
15. REMOVE COLUMN HOLE COVER SILENCER SHEET |
Pull back the floor carpet, remove the 2 clips and remove the column hole cover silencer sheet.
![]() |
16. REMOVE STEERING INTERMEDIATE SHAFT ASSEMBLY |
Loosen bolt A.
![]() |
Place matchmarks on the steering intermediate assembly and steering gear assembly.
Remove bolt B and detach the steering intermediate assembly from the steering gear assembly.
Place matchmarks on the steering intermediate assembly and steering column assembly.
Remove bolt C and detach the steering intermediate shaft assembly from the steering column assembly.
17. REMOVE STOP LIGHT SWITCH |
![]() |
Disconnect the connector from the stop light switch.
Disconnect the wire harness clamp from the pedal support.
Turn the stop light switch counterclockwise, and remove the stop light switch.
![]() |
18. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER |
![]() |
Remove the stop light switch mounting adjuster from the pedal support.
19. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS |
![]() |
Remove the brake pedal return spring.
Remove the clip and the push rod pin and separate the push rod clevis from the brake pedal.
20. REMOVE BRAKE PEDAL SUPPORT |
![]() |
Remove the 4 nuts and bolt and remove the pedal support.
21. REMOVE BRAKE PEDAL |
Remove the nut and brake pedal shaft and remove the brake pedal from the pedal support.
22. REMOVE BRAKE PEDAL BUSH |
Remove the 2 brake pedal bushes from the brake pedal.
23. REMOVE BRAKE PEDAL PAD |
Remove the brake pedal pad from the brake pedal.