Brake. Yaris. Ncp93, 131
Brake Control Dynamic Control Systems. Yaris. Ncp93, 131
Front Speed Sensor (For Sedan) -- Installation |
| 1. INSTALL FRONT SPEED SENSOR |
Install the speed sensor onto the steering knuckle with the bolt.
- Torque:
- 8.5 N*m{87 kgf*cm, 75 in.*lbf}
- NOTICE:
- Check that the speed sensor tip and installation portion are free of foreign matter.
- Install the speed sensor without turning it from its original installation angle.
Install the clamp onto the shock absorber with the bolt.
- Torque:
- 29 N*m{300 kgf*cm, 22 ft.*lbf}
Install the clamp onto the body with the bolt.
- Torque:
- 6.0 N*m{61 kgf*cm, 53 in.*lbf}
Install the 3 clips.
Connect the speed sensor connector.
Install the speed sensor clip onto the body.
| 2. INSTALL FRONT FENDER LINER |
Install the front fender liner with the 3 screws, 6 clips and 4 grommets.
- NOTICE:
- The speed sensor wire should not protrude beyond the front fender liner.
| 3. INSTALL FRONT WHEEL |
- Torque:
- 103 N*m{1,050 kgf*cm, 76 ft.*lbf}
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}
| 5. CHECK VSC SENSOR SIGNAL (w/ VSC) |
| 6. CHECK ABS SENSOR SIGNAL (w/o VSC) |