Front Stabilizer Bar (For Hatchback) Installation

Install the front No. 1 stabilizer bar bush onto the front stabilizer bar.

Text in Illustration

*1	Bush Stopper
	Front Side
	Outer Side

HINT:

1. Install the front No. 1 stabilizer bar bush onto the front stabilizer bar so that the bush stopper of the front stabilizer bar faces the outside of the vehicle.
   
2. Install the front No. 1 stabilizer bar bush with its cutout facing the front of the vehicle.
   

Install the front stabilizer bar onto the front suspension crossmember sub-assembly with the paint mark on the left side of the vehicle.

Text in Illustration

*a	Paint Mark
	Left Side

Provisionally tighten bolt A.

Tighten the bolts to the specified torque, in the order of B then A.

Torque:

47 N*m{479 kgf*cm, 35 ft.*lbf}

Install the manual steering gear onto the front suspension crossmember with the 2 bolts and 2 nuts.

Torque:

96 N*m{979 kgf*cm, 71 ft.*lbf}

NOTICE:

Keep the nut from rotating while turning the bolt.

Install the front stabilizer link assembly with the nut.

Torque:

74 N*m{755 kgf*cm, 55 ft.*lbf}

HINT:

Using a socket hexagon wrench 6 to hold the stud.