Rear Axle Hub (For Hatchback) Removal

Drivetrain. Yaris. Ncp93, 131
Axle And Differential. Yaris. Ncp93, 131

  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)

  3. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)

  4. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY (for Rear Disc Brake)

  5. REMOVE REAR DISC BRAKE PAD (for Rear Disc Brake)

  6. REMOVE REAR DISC BRAKE CYLINDER MOUNTING (for Rear Disc Brake)

  7. REMOVE REAR DISC (for Rear Disc Brake)

  8. SEPARATE SKID CONTROL SENSOR WIRE (w/ ABS)

  9. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)

  10. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)

Rear Axle Hub (For Hatchback) -- Removal


HINT:
  1. Use the same procedure for the RH side as for the LH side.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR WHEEL


2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)


3. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)


    Yaris. Ncp93, 131

  1. Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder operation lever.



    Yaris. Ncp93, 131.Axle And Differential.Axle System (For Sedan).Rear Axle Hub (For Hatchback) Removal

  1. Insert an offset wrench 14 mm at the base of the parking brake cable as shown in the illustration to disengage the clip. Pull out the parking brake cable from the rear disc brake cylinder assembly.

    Text in Illustration
    *1
    		No. 3 Parking Brake Cable Assembly
    *2
    		Clip
    *3
    		Offset Wrench 14 mm


4. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY (for Rear Disc Brake)


    Yaris. Ncp93, 131

  1. Hold the rear disc brake pad guide pin and remove the 2 bolts and the rear disc brake cylinder assembly.



5. REMOVE REAR DISC BRAKE PAD (for Rear Disc Brake)


    Yaris. Ncp93, 131

  1. Remove the 2 disc brake pads from the rear disc brake cylinder mounting.



6. REMOVE REAR DISC BRAKE CYLINDER MOUNTING (for Rear Disc Brake)


    Yaris. Ncp93, 131

  1. Remove the 2 bolts and the rear disc brake cylinder mounting from the axle beam.



7. REMOVE REAR DISC (for Rear Disc Brake)


    Yaris. Ncp93, 131.Axle And Differential.Axle System (For Sedan).Rear Axle Hub (For Hatchback) Removal

  1. Place matchmarks on the rear disc and axle hub, and remove the rear disc.

    Text in Illustration
    *a
    		Matchmark


8. SEPARATE SKID CONTROL SENSOR WIRE (w/ ABS)


    Yaris. Ncp93, 131

  1. Using a screwdriver, disengage the claw of the connector lock portion and disconnect the skid control sensor wire LH connector.

    NOTICE:
    Do not remove the connector cover from the connector because the skid control sensor wire may be damaged.


    Yaris. Ncp93, 131

  1. Remove the nut and separate the skid control sensor wire LH.



9. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)


    Yaris. Ncp93, 131

  1. Remove the 4 bolts and remove the axle hub and bearing from the axle beam.



10. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)


    Yaris. Ncp93, 131

  1. Remove the 4 bolts and remove the axle hub and bearing and the dust cover from the axle beam.