Rear Axle Hub Bolt (For Sedan) Replacement

Release the parking brake and remove the rear brake drum.
If the rear brake drum cannot be removed easily, perform the following procedure.

Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

Using another screwdriver, contract the brake shoe by turning the adjusting bolt.

Using SST and a screwdriver or the equivalent, remove the hub bolt.

SST

09611-12010

Install the washer and the nut onto a new hub bolt as shown in the illustration.

Using a screwdriver or the equivalent to hold the hub and bearing, install the hub bolt by tightening the nut.

Provisionally install the 2 hub nuts.

Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

Using a screwdriver, release the adjuster 12 notches.

Install the hole plug.