Back-Up Light Switch (For Sedan) Installation

Using SST, install the back-up light switch and a new gasket to the transaxle case.

SST

09817-16011

Torque:

40 N*m{410 kgf*cm, 30 ft.*lbf}

Install the 2 clamps.

NOTICE:

Be sure to use boss B.

Connect the back-up light switch connector.

Connect the transmission control shift cable with the clip*1.

Connect the transmission control shift cable with a new clip*2.

Install air cleaner cap sub-assembly with air cleaner hose No. 1.

Tighten the hose clamp to the specified torque.

Torque:

3.0 N*m{31 kgf*cm, 27 in.*lbf}

Connect the wire harness clamp and mass air flow meter connector.

Connect ventilation hose No. 2.

Connect the vacuum switching valve assembly connector and wire harness clamp.

Connect fuel vapor feed hose No. 1 and fuel vapor feed hose No. 2 to the vacuum switching valve assembly.

Tighten the 2 A nuts, then the 2 B nuts.

Torque:

7.0 N*m{71 kgf*cm, 62 in.*lbf}