Shift Lever (For Sedan) Installation

Provisionally install the shift lever with the 4 bolts.

NOTICE:

Do not jam the wiring of the indicator light or shift lock.

Tighten the 4 bolts in order, from A to D.

Torque:

12 N*m{122 kgf*cm, 9 ft.*lbf}

Install the shift lock control computer connector and indicator light connector.

Turn the nut of the control cable and push in the lock.

Install the control cable onto the shift lever retainer.

CAUTION:

1. Install the cable with the projection of the cable outer facing upward.
   
2. After installing, check that the lock of the cable outer is protruding beyond portion A-A, as shown in the illustration.
   

Connect the control cable to the shift lever.

When shifting the lever from P to the R position with the ignition switch ON and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position.

Start the engine and make sure that the vehicle moves forward when shifting the lever from N to the D position and moves rearward when shifting the lever to the R position.
If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.

Shift the shift lever to the N position.

Slide the adjuster case cover in the direction shown in the illustration and pull out the lock piece.

Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.

Press the lock piece into the adjuster case and lock it.

Slide the cover in the direction shown in the illustration.

NOTICE:

Slide the cover past the protrusion of the lock piece.

Inspect the operation after the adjustment.

Engage the 4 claws and install the rear console box.

Install the 2 bolts and 2 screws.

Connect the clamp.

Install the console box carpet.

Connect the connector.

Engage the 3 clips and 3 claws and install the rear upper console panel.

Engage the 5 clips and the claw and install the upper console panel.

Engage the 2 claws and 2 clips and install the instrument panel finish panel.

Install the shift lever knob sub-assembly onto the shift lever.