Shift Lever (For Sedan) Inspection

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1 (IG) - 8 (E)	Ignition switch off	11 to 14 V
1 (IG) - 8 (E)	Ignition switch off	Below 1 V
6 (ACC) - 8 (E)	Ignition switch ON	11 to 14 V
6 (ACC) - 8 (E)	Ignition switch ACC	11 to 14 V
6 (ACC) - 8 (E)	Ignition switch off	Below 1 V
7 (STP) - 8 (E)	Depress brake pedal	11 to 14 V
7 (STP) - 8 (E)	Release brake pedal	Below 1 V
12 (KLS+) - 8 (E)	Ignition switch ACC and shift lever P	Below 1 V
12 (KLS+) - 8 (E)	Ignition switch ACC and shift lever except P	7.5 to 11 V
12 (KLS+) - 8 (E)	Ignition switch ACC and shift lever except P (after approx. 1 second)	6 to 9 V

NOTICE:

Do not disconnect the shift lock control unit assembly connector.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
8 (E) - Body ground	Always	Below 1 Ω

NOTICE:

Do not disconnect the shift lock control unit assembly connector.