Valve Body Assembly (For Sedan) Inspection
INSPECT SHIFT SOLENOID VALVE S1
INSPECT SHIFT SOLENOID VALVE S2
INSPECT SHIFT SOLENOID VALVE ST
INSPECT SHIFT SOLENOID VALVE SLT
INSPECT SHIFT SOLENOID VALVE SLU
Valve Body Assembly (For Sedan) -- Inspection |
| 1. INSPECT SHIFT SOLENOID VALVE S1 |
Measure the resistance.
- Standard resistance:
Tester Connection
| Specified Condition
|
Solenoid Connector (S1) - Solenoid Body (S1)
| 11 to 15 Ω at 20°C (68°F)
|
Connect the positive (+) battery lead to the terminal of the solenoid connector, and the negative (-) battery lead to the solenoid body, and check the operation of the valve.
- NOTICE:
- While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
- OK:
- The solenoid makes an operating sound.
| 2. INSPECT SHIFT SOLENOID VALVE S2 |
Measure the resistance.
- Standard resistance:
Tester Connection
| Specified Condition
|
Solenoid Connector (S2) - Solenoid Body (S2)
| 11 to 15 Ω at 20°C (68°F)
|
Connect the positive (+) battery lead to the terminal of the solenoid connector, and the negative (-) battery lead to the solenoid body, and check the operation of the valve.
- NOTICE:
- While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
- OK:
- The solenoid makes an operating sound.
| 3. INSPECT SHIFT SOLENOID VALVE ST |
Measure the resistance.
- Standard resistance:
Tester Connection
| Specified Condition
|
Solenoid Connector (ST) - Solenoid Body (ST)
| 11 to 15 Ω at 20°C (68°F)
|
Connect the positive (+) battery lead to the terminal of the solenoid connector, and the negative (-) battery lead to the solenoid body, and check the operation of the valve.
- NOTICE:
- While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
- OK:
- The solenoid makes an operating sound.
| 4. INSPECT SHIFT SOLENOID VALVE SLT |
Measure the resistance.
- Standard resistance:
Tester Connection
| Specified Condition
|
1 - 2
| 5.0 to 5.6 Ω at 20°C (68°F)
|
Connect the positive (+) battery lead with a 21 W bulb to terminal 2 and the negative (-) battery lead to terminal 1 of the solenoid valve connector, and check the operation of the valve.
- NOTICE:
- While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
- OK:
- The solenoid makes an operating sound.
| 5. INSPECT SHIFT SOLENOID VALVE SLU |
Measure the resistance.
- Standard resistance:
Tester Connection
| Specified Condition
|
1 - 2
| 5.0 to 5.6 Ω at 20°C (68°F)
|
Connect the positive (+) battery lead with a 21 W bulb to terminal 2 and the negative (-) battery lead to terminal 1 of the solenoid valve connector, and check the operation of the valve.
- NOTICE:
- While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
- OK:
- The solenoid makes an operating sound.
