Cruise Control Main Switch (For Sedan) Installation

Engine Hybrid System. Yaris. Ncp93, 131
Cruise Control. Yaris. Ncp93, 131

  1. INSTALL CRUISE CONTROL MAIN SWITCH

  2. INSTALL STEERING PAD

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. INSPECT SRS WARNING LIGHT

Cruise Control Main Switch (For Sedan) -- Installation



1. INSTALL CRUISE CONTROL MAIN SWITCH


    Yaris. Ncp93, 131

  1. Install the cruise control main switch with the 2 screws.

    Torque:
    2.4 N*m{24 kgf*cm, 21 in.*lbf}

  1. Connect the connector.



2. INSTALL STEERING PAD


Yaris. Ncp93, 131.Cruise Control.Cruise Control System (For Sedan).Cruise Control Main Switch (For Sedan) Installation
NOTICE:
Do not use a steering pad that has been dropped.

  1. Confirm that the ignition switch is turned to OFF.

  1. Confirm that the negative battery terminal is detached.

    CAUTION:
    Do not begin the operation for at least 90 seconds after the negative battery terminal is detached.

  1. Connect the horn terminal.

  1. Connect the airbag connector.

    NOTICE:
    1. Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.
    2. Securely lock the locking button.


    Yaris. Ncp93, 131

  1. Install the steering pad.

  1. Using "Torx" socked wrench T30, tighten the 2 bolts.

    Torque:
    8.8 N*m{90 kgf*cm, 78 in.*lbf}
    NOTICE:
    Tighten the 2 bolts while holding the steering pad to prevent it moving upward.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N*m{55 kgf*cm, 48 in.*lbf}


4. INSPECT SRS WARNING LIGHT
(YARIS_NCP93 RM000000XFD0CVX.html)