Cruise Control System (For Hatchback) Tc And Cg Terminal Circuit
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)
CRUISE CONTROL SYSTEM (for Hatchback) - TC and CG Terminal Circuit |
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND) |
Disconnect the A72 ECM connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
D102-13 (TC) - A72-23 (TC)
| Always
| Below 1 Ω
|
D102-4 (CG) - Body ground
|
D102-13 (TC) - Body ground
| Always
| 10 kΩ or higher
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
