Water Pump (For Hatchback) On-Vehicle Inspection
REMOVE ENGINE UNDER COVER RH
REMOVE FAN AND GENERATOR V BELT
REMOVE GENERATOR ASSEMBLY
REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH
REMOVE WATER PUMP PULLEY
INSPECT ENGINE WATER PUMP ASSEMBLY
Water Pump (For Hatchback) -- On-Vehicle Inspection |
| 1. REMOVE ENGINE UNDER COVER RH |
| 2. REMOVE FAN AND GENERATOR V BELT |
Loosen bolts A and B.
Release the fan and generator V belt tension and remove the fan and generator V belt.
| 3. REMOVE GENERATOR ASSEMBLY |
Remove the terminal cap.
Disconnect the connector and the harness clamp.
Remove the nut and disconnect the wire harness from terminal B.
Text in Illustration*1
| Terminal B
|
Remove the belt adjusting slider fixing bolt A, nut B and the belt adjusting slider.
Remove the bolt A, screw B and the piping clamp.
Remove the fixing bolt and the generator assembly.
| 4. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH |
- HINT:
- Only perform this procedure when replacement of the engine mounting insulator RH is necessary.
Remove the 3 bolts and engine mounting insulator RH.
| 5. REMOVE WATER PUMP PULLEY |
| 6. INSPECT ENGINE WATER PUMP ASSEMBLY |
Turn the pulley and check that the water pump bearing moves smoothly and quietly.
If necessary, replace the engine water pump assembly.
Install the fan and generator V belt
(YARIS_NCP93 RM000001DCG01DX.html)
