Intake Manifold (For Hatchback) Installation

Install the gasket to the intake manifold.

Temporarily install the intake manifold onto the cylinder head sub-assembly with the 3 bolts and 2 nuts.

Tighten the 3 bolts and 2 nuts in the order shown in the illustration.

Torque:

30 N*m{306 kgf*cm, 22 ft.*lbf}

Install the oil level dipstick.

Engage the wire harness clamp and install the wire harness to the intake manifold.

Install the 2 wire harness brackets with the 2 bolts.

Torque:

11 N*m{112 kgf*cm, 8 ft.*lbf}

Connect the union to connector tube hose to the intake manifold.

Connect the ventilation hose to the intake manifold.

Using a "TORX" socket wrench E2, install the 3 stud bolts to the intake manifold.

Torque:

4.0 N*m{41 kgf*cm, 35 in.*lbf}