Heated Oxygen Sensor (For Hatchback) Installation

Using SST, install the heated oxygen sensor.

SST

09224-00010

Torque:

without SST:

44 N*m{449 kgf*cm, 32 ft.*lbf}

with SST:

40 N*m{408 kgf*cm, 30 ft.*lbf}

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.

HINT:

1. The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
   
2. The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) (YARIS_NCP93 RM00000482L007X.html).
   
3. This torque value is effective when SST is parallel to the torque wrench.
   

Pass the connector through the hole into the inside of the vehicle and install the oxygen sensor wire grommet.

Connect the heated oxygen sensor connector.

Install the wire harness to the wire harness bracket.