Turn Signal Flasher Assembly Inspection

Vehicle Exterior. Corolla. Zre142 Aze141
Lighting (Ext). Corolla. Zre142 Aze141

  1. INSPECT TURN SIGNAL FLASHER ASSEMBLY

Turn Signal Flasher Assembly -- Inspection



1. INSPECT TURN SIGNAL FLASHER ASSEMBLY


    Corolla. Zre142 Aze141.Lighting (Ext).Lighting System.Turn Signal Flasher Assembly  Inspection
  1. Remove the turn signal flasher assembly from the instrument panel junction block.

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    Condition
    Specified Condition
    4 (+B) - Body ground
    Always
    11 to 14 V
    1 (IG) - Body ground
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    If the result is not as specified, there is a malfunction on the wire harness side.
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    5 (EL) - Body ground
    Turn signal switch OFF
    10 kΩ or higher
    Turn signal switch in LH
    Below 1 Ω
    6 (ER) - Body ground
    Turn signal switch OFF
    10 kΩ or higher
    Turn signal switch in RH
    Below 1 Ω
    7 (GND) - Body ground
    Always
    Below 1 Ω
    8 (EHW) - Body ground
    Hazard warning switch OFF
    10 kΩ or higher
    Hazard warning switch ON
    Below 1 Ω
    If the result is not as specified, there is a malfunction on the wire harness side.


  1. Install the turn signal flasher assembly to the instrument panel junction block.


    Corolla. Zre142 Aze141.Lighting (Ext).Lighting System.Turn Signal Flasher Assembly  Inspection

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    Switch Condition
    Specified Condition
    2A-27 (LL) - Body ground
    Turn signal switch OFF
    Below 1 V
    Turn signal switch in LH
    11 to 14 V (60 to 120 times per minute)
    Hazard warning switch OFF
    Below 1 V
    Hazard warning switch ON
    11 to 14 V (60 to 120 times per minute)
    2A-28 (LR) - Body ground
    Turn signal switch OFF
    Below 1 V
    Turn signal switch in RH
    11 to 14 V (60 to 120 times per minute)
    Hazard warning switch OFF
    Below 1 V
    Hazard warning switch ON
    11 to 14 V (60 to 120 times per minute)
    2B-14 (LL) - Body ground
    Turn signal switch OFF
    Below 1 V
    Turn signal switch in LH
    11 to 14 V (60 to 120 times per minute)
    Hazard warning switch OFF
    Below 1 V
    Hazard warning switch ON
    11 to 14 V (60 to 120 times per minute)
    2B-31 (LR) - Body ground
    Turn signal switch OFF
    Below 1 V
    Turn signal switch in RH
    11 to 14 V (60 to 120 times per minute)
    Hazard warning switch OFF
    Below 1 V
    Hazard warning switch ON
    11 to 14 V (60 to 120 times per minute)
    If the result is not as specified, replace the turn signal flasher assembly.