Stop Light Switch Installation

Vehicle Exterior. Corolla. Zre142 Aze141
Lighting (Ext). Corolla. Zre142 Aze141

  1. INSTALL STOP LIGHT SWITCH ASSEMBLY

Stop Light Switch -- Installation



1. INSTALL STOP LIGHT SWITCH ASSEMBLY


    Corolla. Zre142 Aze141

  1. Insert the stop light switch assembly until the rod hits the cushion.

    NOTICE:
    When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.


    Corolla. Zre142 Aze141.Lighting (Ext).Lighting System.Stop Light Switch Installation

  1. Make a quarter turn clockwise to install the stop light switch assembly.

    Torque:
    1.5 N*m{15 kgf*cm, 13 in.*lbf}or less
    NOTICE:
    When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.


    Corolla. Zre142 Aze141

  1. Connect the connector.



    Corolla. Zre142 Aze141.Lighting (Ext).Lighting System.Stop Light Switch Installation

  1. Check the protrusion of the rod.

    Protrusion of the rod:
    1.5 to 2.5 mm (0.059 to 0.098 in.)
    If the protrusion is not within the specified range, adjust it.
    NOTICE:
    Do not depress the brake pedal.