Rear Combination Light Assembly On-Vehicle Inspection

Disconnect the connector from the rear combination light assembly.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

LH Side:

Tester Connection	Condition	Specified Condition
L7-1 - L7-4	Light control switch OFF	Below 1 V
	Light control switch in TAIL	11 to 14 V
L7-2 - L7-4	Brake pedal released	Below 1 V
	Brake pedal depressed	11 to 14 V
L7-3 - L7-4	Turn signal switch OFF	Below 1 V
	Ignition switch ON and Turn signal switch in LH	11 to 14 V (60 to 120 times per minute)

RH Side:

Tester Connection	Condition	Specified Condition
L29-1 - L29-4	Light control switch OFF	Below 1 V
	Light control switch in TAIL	11 to 14 V
L29-2 - L29-4	Brake pedal released	Below 1 V
	Brake pedal depressed	11 to 14 V
L29-3 - L29-4	Turn signal switch OFF	Below 1 V
	Ignition switch ON and Turn signal switch in RH	11 to 14 V (60 to 120 times per minute)