Headlight Assembly -- Removal |
| 1. REMOVE RADIATOR GRILLE PROTECTOR |
Remove the 2 radiator grille protectors.
 |
| 2. REMOVE NO. 4 ENGINE UNDER COVER (for 2AZ-FE) |
Remove the 4 screws, 4 clips and No. 4 engine under cover.
 |
| 3. REMOVE FRONT BUMPER ASSEMBLY (for 2AZ-FE) |
Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
- HINT:
- Use the same procedure for the RH side and LH side.
 |
Put protective tape around the front bumper assembly.
Text in Illustration *1 Protective Tape
 |
Remove the 2 screws, 2 bolts and 7 clips.
Disengage the 6 claws and remove the front bumper assembly as shown in the illustration.
 |
Disconnect the 2 fog light connectors.
| 4. REMOVE FRONT BUMPER ASSEMBLY (for 2ZR-FE) |
Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
- HINT:
- Use the same procedure for the RH side and LH side.
|
Put protective tape around the front bumper assembly.
Text in Illustration *1 Protective Tape
 |
Remove the 4 screws, 2 bolts and 7 clips.
Disengage the 6 claws and remove the front bumper assembly as shown in the illustration.
|
w/ Fog Light:
Disconnect the 2 fog light connectors.
| 5. REMOVE HEADLIGHT ASSEMBLY |
Remove the 2 bolts and screw.
 |
Disengage the claw.
Disconnect each connector and remove the headlight assembly.