Washer Level Warning Switch Inspection

Vehicle Exterior. Corolla. Zre142 Aze141
Wiper Washer. Corolla. Zre142 Aze141

  1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

Washer Level Warning Switch -- Inspection



1. INSPECT LEVEL WARNING SWITCH ASSEMBLY


    Corolla. Zre142 Aze141.Wiper Washer.Wiper And Washer System.Washer Level Warning Switch Inspection

  1. Remove the washer jar.

  1. Disconnect the level warning switch connector.

    HINT:
    The check should be performed with the level warning switch assembly installed to the washer jar.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 (SLR1) - 2 (E)
    		Washer jar is full
    		10 kΩ or higher
    1 (SLR1) - 2 (E)
    		Washer jar is empty
    		Below 1 Ω
    If the result is not as specified, replace the level warning switch assembly.