Outer Rear View Mirror Installation

w/ Heater:

1. Connect the connectors.
   

Engage the 2 guides on the upper part of the outer mirror glass to the outer mirror as shown in the illustration.

Engage the 2 claws on the lower part of the outer mirror glass to the outer mirror as shown in the illustration.

Engage the 7 claws to install the outer mirror cover to the outer rear view mirror assembly with cover.

NOTICE:

If there is a gap between the cover and the mirror body, it may cause noise during driving.

Engage the 7 claws to install the outer mirror cover.

Engage the claw, and temporarily install the outer rear view mirror assembly with cover.

Install the 3 bolts.

Torque:

9.0 N*m{92 kgf*cm, 80 in.*lbf}

Engage the clamp and connect the connector.

Engage the clip and clamp, and install the front door lower frame bracket garnish.

Connect the connector.

Engage the clip and clamp, and install the front door lower frame bracket garnish.

Engage the front door trim board with the 5 claws on the front door inner glass weatherstrip.

Engage the 10 clips and install the front door trim board to the front door panel.

Install the 2 screws.

Engage the claw to install the door armrest cap.

Engage the 2 clips and 6 claws, and install the front armrest upper base panel.

w/ Power Door Lock:

1. Connect the connector.
   

Connect the connector.

Engage the 2 clips and 6 claws, and install the front armrest upper base panel.

Engage the 3 claws and install the front door inside handle bezel.

Temporarily install the front door window regulator handle assembly and fully close the window glass.

Install the front door regulator inside handle plate.

Install the snap ring to the front door window regulator handle assembly.

Install the front door window regulator handle assembly as shown in the illustration.