Vehicle Exterior. Corolla. Zre142 Aze141
Window Glass. Corolla. Zre142 Aze141
Power Window Control System -- Data List / Active Test |
| DATA LIST |
- HINT:
- Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menu: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the Techstream.
Main Body Tester Display Measurement Item/Range Normal Condition Diagnostic Note D Door Courtesy SW Driver side door courtesy switch signal/ON or OFF ON: Driver side door is open
OFF: Driver side door is closed-
| ACTIVE TEST |
- HINT:
- Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menu: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the Techstream.
Main Body Tester Display Test Part Control Range Diagnostic Note IG OFF P/W Control Permission Output Power window ON or OFF (After ignition switch is turned off) -