Vehicle Interior. Corolla. Zre142 Aze141
Heating Air Conditioning. Corolla. Zre142 Aze141
Ambient Temperature Sensor -- Installation |
| 1. INSTALL AMBIENT TEMPERATURE SENSOR |
Engage the clamp and install the ambient temperature sensor.
 |
Connect the connector.
| 2. INSTALL FRONT BUMPER ASSEMBLY (for 2AZ-FE) |
Connect the 2 fog light connectors.
Engage the 6 claws and install the front bumper assembly as shown in the illustration.
 |
Install the 2 screws, 7 clips and 2 bolts.
- Torque:
- Bolt:
- 5.0 N*m{51 kgf*cm, 44 in.*lbf}
Install the pin hold clip.
Text in Illustration *a Correct *b Incorrect - NOTICE:
- Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.
- HINT:
- Use the same procedure for the RH side and LH side.
 |
| 3. INSTALL FRONT BUMPER ASSEMBLY (for 2ZR-FE) |
w/ Fog Light:
Connect the 2 fog light connectors.
Engage the 6 claws and install the front bumper assembly as shown in the illustration.
|
Install the 4 screws, 7 clips and 2 bolts.
- Torque:
- Bolt:
- 5.0 N*m{51 kgf*cm, 44 in.*lbf}
Install the pin hold clip.
Text in Illustration *a Correct *b Incorrect - NOTICE:
- Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.
- HINT:
- Use the same procedure for the RH side and LH side.
|
| 4. INSTALL NO. 4 ENGINE UNDER COVER (for 2AZ-FE) |
Install the No. 4 engine under cover with the 4 screws and 4 clips.
| 5. INSTALL RADIATOR GRILLE PROTECTOR |
Install the 2 radiator grille protectors.
- Torque:
- 5.0 N*m{51 kgf*cm, 44 in.*lbf}
| 6. ADJUST FOG LIGHT AIMING (w/ Fog Light) |