Front Seat Inner Belt Assembly -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (COROLLA_ZRE142 RM000000KT10H0X.html).
| 2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) |
| 3. REMOVE OUTER SEAT TRACK COVER (for Manual Seat) |
Lift up the seat track adjusting handle and move the seat to the foremost position.
Disengage the 2 claws and remove the outer seat track cover.
 |
| 4. REMOVE INNER SEAT TRACK COVER (for Manual Seat) |
Disengage the 2 claws and remove the inner seat track cover.
 |
| 5. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) |
Remove the 2 bolts on the rear side of the seat.
 |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
 |
Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.
Disconnect the connectors under the front seat assembly.
Remove the front seat assembly.
- NOTICE:
- Be careful not to damage the vehicle body.
| 6. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat) |
| 7. REMOVE OUTER SEAT TRACK COVER (for Power Seat) |
Operate the power seat switch knob and move the seat to the foremost position.
|
Disengage the 2 claws and remove the outer seat track cover.
| 8. REMOVE INNER SEAT TRACK COVER (for Power Seat) |
Disengage the 2 claws and remove the inner seat track cover.
 |
| 9. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) |
Remove the 2 bolts on the rear side of the seat.
 |
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
 |
Operate the power seat switch knob and move the seat to the center position. Also, operate the power seat switch knob and move the seatback to the upright position.
Disconnect the cable from the negative (-) battery terminal.
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (COROLLA_ZRE142 RM000000KT10H0X.html).
Disconnect the connectors under the seat.
Remove the seat.
- NOTICE:
- Be careful not to damage the vehicle body.
| 10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat) |
Disconnect each connector and clamp.
Remove the nut and the front seat inner belt assembly.
 |