Power Seat Switch Installation

Connect the connector.

Install the power seat switch with the 3 screws.

Connect the connector to the front power seat lumbar switch.

Engage the claw and the guide.

Install the front seat cushion shield assembly with the 5 screws.

Install the 2 hooks.

Engage the 2 claws and install the slide and vertical power seat switch knob.

Engage the 2 claws and install the reclining power seat switch knob.

Place the front seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.

Connect the connectors under the seat.

Connect the cable to the negative (-) battery terminal.

Temporarily install the front seat assembly with the 4 bolts.

Operate the power seat switch knob and move the seat to the rearmost position.

Tighten the 2 bolts on the front side of the seat.

Torque:

37 N*m{377 kgf*cm, 27 ft.*lbf}

HINT:

Tighten the bolts in the order indicated in the illustration.

Operate the power seat switch knob and move the seat to the foremost position.

Tighten the 2 bolts on the rear side of the seat.

Torque:

37 N*m{377 kgf*cm, 27 ft.*lbf}

HINT:

Tighten the bolts in the order indicated in the illustration.

Engage the 2 claws and install the inner seat track cover.

Engage the 2 claws and install the outer seat track cover.

Inspect the power seat operation.