Rear Brake (For Disc Type) Removal

Brake. Corolla. Zre142 Aze141
Brake (Rear). Corolla. Zre142 Aze141

  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)

  5. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)

  6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  8. REMOVE REAR WHEEL

  9. DRAIN BRAKE FLUID

  10. LOOSEN PARKING BRAKE CABLE

  11. REMOVE PARKING BRAKE LEVER PROTECTOR

  12. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

  13. SEPARATE REAR BRAKE FLEXIBLE HOSE

  14. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

  15. REMOVE REAR DISC BRAKE PAD

  16. REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM

  17. REMOVE REAR DISC BRAKE PAD SUPPORT PLATE

  18. REMOVE REAR DISC BRAKE PAD GUIDE PIN

  19. REMOVE REAR DISC BRAKE BUSHING DUST BOOT

  20. REMOVE REAR DISC BRAKE CYLINDER MOUNTING

  21. REMOVE REAR DISC

Rear Brake (For Disc Type) -- Removal


HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The following procedure listed is for the LH side.


1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH


    Corolla. Zre142 Aze141

  1. Disengage the 3 claws and clip, and then remove the lower instrument panel finish panel LH.



2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH


    Corolla. Zre142 Aze141

  1. Disengage the 3 claws and clip, and then remove the lower instrument panel finish panel RH.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    Corolla. Zre142 Aze141

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    Corolla. Zre142 Aze141

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



5. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)


    Corolla. Zre142 Aze141

  1. Disengage the 2 claws and 2 clips.

  1. Disengage the guide and remove the center No.1 instrument cluster finish panel assembly.



6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)


    Corolla. Zre142 Aze141

  1. Disengage the 2 claws and 2 clips.

  1. Disengage the guide and remove the center No.1 instrument cluster finish panel assembly.



7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    Corolla. Zre142 Aze141

  1. Using a moulding remover, disengage the 6 clips and 2 guides, and remove the upper console panel sub-assembly.



8. REMOVE REAR WHEEL


9. DRAIN BRAKE FLUID
NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.


10. LOOSEN PARKING BRAKE CABLE


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Disc Type) Removal

  1. Loosen the lock nut and adjusting nu to completely release the parking brake cable.



11. REMOVE PARKING BRAKE LEVER PROTECTOR


    Corolla. Zre142 Aze141

  1. Remove the parking brake lever protector from the No. 3 parking brake cable assembly.



12. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY


    Corolla. Zre142 Aze141

  1. Disengage the clamp from the No. 3 parking brake cable assembly.

  1. Remove the bolt.



    Corolla. Zre142 Aze141

  1. Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.



    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Disc Type) Removal

  1. Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    HINT:
    Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.


13. SEPARATE REAR BRAKE FLEXIBLE HOSE


    Corolla. Zre142 Aze141

  1. Remove the union bolt and gasket, and separate the rear brake flexible hose from the rear disc brake cylinder assembly.



14. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Disc Type) Removal

  1. Hold the rear disc brake slide pin and remove the 2 bolts and rear disc brake cylinder assembly.



15. REMOVE REAR DISC BRAKE PAD


    Corolla. Zre142 Aze141

  1. Remove the 2 disc brake pads from the rear disc brake cylinder mounting.



16. REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM

  1. Remove the 4 anti-squeal shims from each brake pad.



17. REMOVE REAR DISC BRAKE PAD SUPPORT PLATE


    Corolla. Zre142 Aze141

  1. Remove the rear disc brake pad support plate (upper) and rear disc brake pad support plate (lower) from the disc brake cylinder mounting.

    NOTICE:
    Each rear disc brake pad support plate has a different shape. Be sure to put an identification mark on each rear disc brake pad support plate so that it can be installed to its original position.


18. REMOVE REAR DISC BRAKE PAD GUIDE PIN


    Corolla. Zre142 Aze141

  1. Remove the 2 rear disc brake pad guide pins from the disc brake cylinder mounting.



19. REMOVE REAR DISC BRAKE BUSHING DUST BOOT


    Corolla. Zre142 Aze141

  1. Remove the 2 rear disc brake bushing dust boots from the rear disc brake cylinder mounting.



20. REMOVE REAR DISC BRAKE CYLINDER MOUNTING


    Corolla. Zre142 Aze141

  1. Remove the 2 bolts and the rear disc brake cylinder mounting from the axle beam.



21. REMOVE REAR DISC


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Disc Type) Removal

  1. Remove the rear disc.

    HINT:
    Place matchmarks on the disc and axle hub.