Brake Pedal -- Removal |
| 1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
- HINT:
- Refer to the instructions for Removal of the upper instrument panel sub-assembly (Link).
| 2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Remove the 2 screws <B>.
 |
Disengage the 5 claws, 2 guides and 2 clips, and then remove the lower instrument panel finish panel sub-assembly.
 |
| 3. REMOVE BRAKE PEDAL RETURN SPRING |
Remove the brake pedal return spring from the brake pedal support sub-assembly.
 |
| 4. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS |
Remove the clip and clevis pin and separate the brake master cylinder push rod clevis from the brake pedal sub-assembly.
| 5. REMOVE STOP LIGHT SWITCH ASSEMBLY |
Disconnect the connector.
 |
Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.
 |
| 6. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER |
Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.
| 7. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY |
Remove the bolt and separate the brake pedal support sub-assembly from the instrument panel reinforcement.
 |
Disengage the 2 clamps from the brake pedal support sub-assembly.
 |
Remove the 4 nuts and brake pedal support sub-assembly.
 |
Remove the nut from the brake pedal support sub-assembly.
 |