Oil Pressure Switch Installation

Engine Hybrid System. Corolla. Zre142 Aze141
2Az-Fe Lubrication. Corolla. Zre142 Aze141

  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

  2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE

  3. INSPECT FOR OIL LEAK

Oil Pressure Switch -- Installation



1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    Corolla. Zre142 Aze141.2Az-Fe Lubrication.Lubrication System.Oil Pressure Switch Installation

  1. Apply adhesive to 2 or 3 threads of the oil pressure switch.

    Adhesive:
    Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

  1. Using a 24 mm deep socket wrench, install the oil pressure switch.

    Torque:
    15 N*m{153 kgf*cm, 11 ft.*lbf}
    NOTICE:
    Do not start the engine for at least 1 hour after installation.

  1. Connect the oil pressure switch connector.



2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE


    Corolla. Zre142 Aze141

  1. Install the air cleaner cap sub-assembly with hose and lock the 3 clamps.

  1. Tighten the air cleaner hose clamp.



    Corolla. Zre142 Aze141

  1. Connect the ventilation hose.



    Corolla. Zre142 Aze141

  1. Connect the 2 vacuum hoses and No. 1 vacuum switching valve connector.



    Corolla. Zre142 Aze141

  1. Connect the 2 wire harness clamps and the mass air flow meter connector.



3. INSPECT FOR OIL LEAK