Fuel Pump Reassembly

Apply a light coat of gasoline or spindle oil to a new O-ring, then install it into the fuel pump.

Connect the fuel pump harness connector.

Apply a light coat of gasoline or spindle oil to the O-ring of the fuel pump again.

Engage the 5 claws, and install the fuel pump filter onto the fuel pump with fuel filter.

NOTICE:

Make sure that the O-ring is not cracked or does not jump out of position during installation.

Engage the 2 claws of the No. 1 fuel suction support.

Connect the fuel pump harness connector.

Engage the 2 claws and install a new E-ring and fuel pump sub-tank.

Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

Install the fuel sender gauge assembly by sliding it downward.

NOTICE:

Make sure that the fuel sender gauge arm does not bend.

Connect the connector of the fuel sender gauge assembly.

NOTICE:

Do not damage the wire harness.