Rear Crankshaft Oil Seal Removal

Engine Hybrid System. Corolla. Zre142 Aze141
2Zr-Fe Engine Mechanical. Corolla. Zre142 Aze141

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

  2. REMOVE MANUAL TRANSAXLE ASSEMBLY (for Manual Transaxle)

  3. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle)

  4. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transaxle)

  5. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transaxle)

  6. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)

  7. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transaxle)

  8. REMOVE REAR ENGINE OIL SEAL

Rear Crankshaft Oil Seal -- Removal



1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT:
COROLLA_ZRE142 RM000002WH607RX.html.


2. REMOVE MANUAL TRANSAXLE ASSEMBLY (for Manual Transaxle)
HINT:
COROLLA_ZRE142 RM000001B3W06CX_01_0193.html for C59.


3. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle)
HINT:
COROLLA_ZRE142 RM00000192D04RX_01_0055.html for U341E.


4. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transaxle)


    Corolla. Zre142 Aze141.2Zr-Fe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Put matchmarks on the clutch cover assembly and the flywheel sub-assembly.

  1. Loosen each set bolt one turn at a time until the spring tension is released.

  1. Remove the set bolts and pull off the clutch cover.

    NOTICE:
    Do not drop the clutch disc.


5. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transaxle)
NOTICE:
Keep the parts clutch disc lining, the pressure plate, and the surface of the flywheel sub-assembly free of oil and foreign matter.


6. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)


    Corolla. Zre142 Aze141.2Zr-Fe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Using SST, hold the crankshaft.

    SST
    09213-58014(91551-80840)
    09330-00021
    NOTICE:
    Check the SST installation positions when installing them to prevent the SST fixing bolts from coming into contact with the timing chain cover sub-assembly.


    Corolla. Zre142 Aze141

  1. Remove the 8 bolts and flywheel.



7. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transaxle)


    Corolla. Zre142 Aze141.2Zr-Fe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Using SST, hold the crankshaft.

    SST
    09213-58014(91551-80840)
    09330-00021
    NOTICE:
    Check the SST installation positions when installing them to prevent the SST fixing bolts from coming into contact with the timing chain cover sub-assembly.


    Corolla. Zre142 Aze141

  1. Remove the 8 bolts, rear spacer, drive plate and front spacer.



8. REMOVE REAR ENGINE OIL SEAL


    Corolla. Zre142 Aze141.2Zr-Fe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Using a knife, cut off the lip of the oil seal.

  1. Using a screwdriver with its tip wrapped with tape, pry out the oil seal.

    NOTICE:
    After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.